Onvif Camera Configuration Tool

1. Download Onvif Tool
2. Onvif Camera Software For Windows
3. Onvif Camera Finder
4. Onvif Camera Configuration Tool Installer

ONVIF Device Manager is an open-source software application (currently available for Windows only), which scans your network for cameras, DVR's, and NVR's, trying to locatea stream address that can then be used for connecting your device to Angelcam. Who should use this? If you've already setup port-forwarding for your device, but Angelcam can't find a stream automatically and/or. Works with ONVIF Device Manager (Windows) and ONVIF Device Tool (Linux) Works with other CCTV Viewing Software that implements the ONVIF standard including Antrica Decoder, Avigilon Control Centre, Bosch BVMS, Milestone, ISpy (Opensource), BenSoft SecuritySpy (Mac), IndigoVision Control Centre and Genetec Security Centre (add camera as ONVIF. The Camera Configuration will open with the bulk registration tool by default. This tool can be used to add multiple cameras that all use the same ONVIF username and password. Skip to the 'adding multiple cameras' section of this guide if you want to add multiple cameras at the same time. Adding a Single Camera.

Download Onvif Tool

ONVIF Device Manager is an open-source software application (currently available for Windows only), which scans your network for cameras, DVR's, and NVR's, trying to locatea stream address that can then be used for connecting your device to Angelcam.

Who should use this?

If you've already setup port-forwarding for your device, but Angelcam can't find a stream automatically and/or:

• Your device documentation doesn't mention a RTSP or MJPEG stream path
• Your camera supplier or manufacturer provides no support
• You can't find any documentation or information on Google

Finding a stream path

• Step 1: Be sure that you are on the same network as the device you're trying to discover (advanced users can also try to find a stream address for remotely accessible cameras as well, just use the 'Add' button and specify the public address and forwarded ONVIF port of the remote device)
• Step 2: Download and install ONVIF Device Manager (Windows only)
• Step 3: Click the 'Refresh' button to scan your network
• Step 4: Select 'Live Video' from the menu

• Step 5: Copy the stream address, shown under the live video, to your clipboard (be sure to replace your local IP address with the public one when connecting directly)
• Note: if your camera is password protected, be sure to enter your credentials in the upper left corner.

Connecting a camera to Angelcam

a) With AngelBox

• Step 1: Open AngelBox's Camera Connector, type in your AngelBox's ID, and let AngelBox detect your device
• Step 2: Once found, click, 'I want to use a different camera stream channel'
• Step 3: Paste the stream address from your clipboard and delete everything except the part after the port. For example if your camera stream has been discovered at 'rtsp://admin:1234@192.168.1.100:554/cam/realmonitor?channel=1&subtype=1' use '/cam/realmonitor?channel=1&subtype=1' only.

A more detailed procedure is explained here.

b) Without AngelBox

• Step 1: Port forwarding needs to be configured on your router for the designated camera
• Step 2: Open Camera Connector
• Step 3: Paste the stream address
• Step 4: Replace the local IP address with the public IP address of your network
• Step 5: Replace the stream port of the camera with the port you set up during the configuration of port forwarding in Step 1

A more detailed procedure is explained here.

Deltarune and undertale. High sierra compatibility checker. And that's it! 👏

If you have any further questions please don't hesitate to contact us at support@angelcam.com.

Still need further assistance? Why not check out our Angelcam Community, where you can connect with other users who are sharing their own experiences and insight into various Angelcam topics and problems.

Onvif Camera Software For Windows

• Step 5: Copy the stream address, shown under the live video, to your clipboard (be sure to replace your local IP address with the public one when connecting directly)
• Note: if your camera is password protected, be sure to enter your credentials in the upper left corner.

Connecting a camera to Angelcam

a) With AngelBox

• Step 1: Open AngelBox's Camera Connector, type in your AngelBox's ID, and let AngelBox detect your device
• Step 2: Once found, click, 'I want to use a different camera stream channel'
• Step 3: Paste the stream address from your clipboard and delete everything except the part after the port. For example if your camera stream has been discovered at 'rtsp://admin:1234@192.168.1.100:554/cam/realmonitor?channel=1&subtype=1' use '/cam/realmonitor?channel=1&subtype=1' only.

A more detailed procedure is explained here.

b) Without AngelBox

• Step 1: Port forwarding needs to be configured on your router for the designated camera
• Step 2: Open Camera Connector
• Step 3: Paste the stream address
• Step 4: Replace the local IP address with the public IP address of your network
• Step 5: Replace the stream port of the camera with the port you set up during the configuration of port forwarding in Step 1

A more detailed procedure is explained here.

Deltarune and undertale. High sierra compatibility checker. And that's it! 👏

If you have any further questions please don't hesitate to contact us at support@angelcam.com.

Still need further assistance? Why not check out our Angelcam Community, where you can connect with other users who are sharing their own experiences and insight into various Angelcam topics and problems.

Onvif Camera Software For Windows

Connecting to your Onvif IP camera*

Try the following connection options in iSpy or Agent to connect to your Onvif IP camera. If an FFMPEG option is available we recommend you try that first as it will often be faster and include audio support. You can also try the VLC plugin if the FFMPEG option isn't working.
The settings for Onvif cameras are built right into our free surveillance software - click 'Add' then 'IP camera with wizard' to automatically setup your Onvif cameras. Remember to also try connecting via ONVIF as Onvif cameras may support ONVIF connections as well.
Start typing in the 'Make' box to find your camera. If your camera is not listed then click 'Get Latest List' in settings or when on the add camera wizard. If you need to modify the URL then add or edit the Onvif camera and you can modify the connection type and URL in the video source dialog (button is top of the first tab).

Onvif compatible software*

Tip: Click a model to generate a URL for your camera

Onvif Camera Finder

* iSpyConnect has no affiliation, connection, or association with Onvif's products. The connection details provided here are crowd sourced from the community and may be incomplete, inaccurate or both. We provide no warranty that you will be successful using these connection URLs or that Onvif products are compatible with iSpy.

Onvif Camera Configuration Tool Installer

Other makes starting with O

All rights reserved. No part of this database may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law.